| |
Welcome to visit Qianteng mould.
The details information of mould steel as below:
|
AISI |
DIN |
STEEL NAME |
ORIGINAL
HARDNESS |
HEATBEATMENT |
USE |
|
1040 |
1.1730 |
ASSAB760 |
13-18HRC |
|
PLASTIC MOULD BASE,EJECTOR PLATE,SUPPORT PILLAR,STOP PIN ETC |
|
1045 |
K-100 |
|
|
|
1050 |
DAIDO P1 |
|
|
|
P20 |
1.2738 |
ASSAB 718 |
28-32HRC |
|
PLASTIC MOULD CAVITY AND CORE INSERT |
|
1.2311 |
THYSSEN2311 |
|
|
|
P20H |
1.2711 |
ASSAB718H |
35-38HRC |
|
PLASTIC MOULD CAVITY AND CORE BLOCK |
|
THYSSEN711 |
|
|
|
H13 |
1.2344 |
ASSAB 8407 |
190HB
12HRC |
48-52HRC |
PLASTIC MOULD CAVITY AND CORE BLOCK,SPRUE,SLIDE,EJECTOR PIN ETC |
|
THYSSEN 2344ESR |
|
|
|
O1 |
1.2510 |
ASSAB DF-2 |
180-220HB
10-18HRC |
54-56HRC |
PLASTIC MOULD COVER PLATE ,INSERT AND GIB ETC |
|
THYSSEN 2510 |
|
|
|
S-7 |
1.2767 |
ASSAB S-7 |
200HB
15HRC |
54-56HRC |
IMPACT INSERT AND COVER PLATE ETC |
|
THYSSEN 2379 |
|
|
|
420 |
1.2083 |
STAVAX S-136 |
200HB(15HRC) |
MIRRIOR POLISHING,52-54HRC |
MIRRIOR POLISHING STEEL OR PVC PLASTIC |
|
THYSSEN 2083 |
PVC PLASTIC,46-48HRC |
|
|
420H |
1.2316 |
S-136H |
32-34HRC |
|
PVC,ACIDIC PLASTIC ETC |
| |
|
THYSSEN 2316ESR |
|
|
| D-2 |
1.2379 |
ASSAB XW41 |
210-240HB
15-22HRC |
56-60HRC |
PLASTIC MOULD CORE PIN,SUB GATE INSERT ETC |
| BECO |
|
MOULD MAX |
40-42HRC |
|
GOOD FOR COOLING |
| AL-BRONZE |
|
|
|
|
ANGLE LIFT GIB ETC |
Molding Plastic Material Covers:
Non-engineering plastic:PP,HDPE,LDPE,PS,HIPS
Engineering lastic: Polycarbonate,Polyamide, Polyacetal,Polyoxy Methylene, POM/PET,PBT/ABS
Corrosion-resistance steel:
s136,2316,420,NAK80...for corrosion plastic material:PVC,POM,PC...mold steel for transparent,hi-polish,mirror-effect plastic:S136,2316,718S,NAK80,PAK90,420
Plastic mould steel treatment:
1.Quenching and Anneling for pretreatment
2. Nitriding or Chorme plating for further hardening of plastic mold surface. and surface hardness could reach HRC 52-55 to resist the wear and abration while the steel core keep flexible for hard collision.
Plastic Mould base system:
Our plastic mould base standard:LKM,DME,HASCO
File format : 2D:dwg /.dxf /.pdf
3D: .igs / .step / .x_t / .prt /.sldprt./.eprt./easm
Plastic Mould base:DME, HASCO, FUTABA, LKM
Hot Runner:MOULD MASTER, MASTER TIP, HUSKY, HASCO, DME, YUDO, INCOE, THERMOPLAY
Hydraulic cylinder:PARKER, TAIYO, STAUBLI, JUFAN
Standard parts:DME, HASCO, MISUMI, PROGRESSIVE, STAUBLI, DAIDO, LKM
Texture:MOLD-TECH, YS, NIHON(also,we make the testure according to customer's request).
|
.jpg)
